Tech Update


 

SHARE:  

Fineblanking Breaks the 200-Strokes/Min. Barrier

Saturday, August 1, 2015
 

Feintool, Cincinnati, OH, introduces the XFT 1500 speed fineblanking press, rated for speeds to 200 strokes/min. The 1500-kN press replaces Feintool’s GKP 100/160 and MFA 1600.

The press is compatible with existing tools and can double their output, according to company officials.

Without a gearbox, the drive motor operates at 200 rpm compared to 1200 rpm as was the case with previous models. The servo motor on this new press reportedly has a much faster dynamic response and can be precisely programmed.

Adding to the functionality of the new press, the Feintool motion-control unit reportedly can define acceleration, part removal and intermediate stops to an accuracy of 2 msec.

Feintool: www.feintool.com

 

See also: Feintool US Operations, Inc.

Related Enterprise Zones: Presses


Reader Comments

Posted by: Chuck Lohre on 8/6/2015 3:53:34 PM - URL: www.lohre.com
I like it too. Read the full release here http://www.lohre.com/blog/fineblanking-breaks-the-200-strokes-per-minute-barrier

Posted by: Brad on 8/6/2015 3:30:42 PM
I like this article

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors