Tech Update


 

SHARE:  

Fast, Compact Deep-Draw Sheet-Hydroforming Press

Wednesday, July 1, 2015
 

Beckwood deep draw sheet hydroforming pressBeckwood, St. Louis, MO, has expanded its Triform product line with the addition of a 10,000-PSI deep-draw sheet-hydroforming press. It features a 20-in.-dia. maximum blank size, 10-in. draw-depth capacity and an integrated tool-change system for fast changeovers.

The new Triform Model 20-10-10BD offers cycle times less than 30 sec., while allowing fabricators to form large parts within a relatively small footprint without altering their facility’s foundation.

“Hydroforming presses are quickly becoming a go-to solution for complex forming challenges,” says Triform technical sales manager Bob Blood.

The 20-10-10BD benefits from all of the same characteristics found in other Triform deep-draw presses—precision diaphragm pressure and punch-position control, combined with built-in recipe handling capability. And, for fast, cost-efficient new-part development, according to company officials, the 20-10-10BD features Triform’s In-Sight feature that allows the operator to pause and open the press at any point in the forming cycle to perform a visual inspection.

Beckwood: www.beckwoodpress.com

 

See also: Beckwood Press Company

Related Enterprise Zones: Presses


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors