1600-Ton Servo Press Cleans Up at German Appliance Maker

Thursday, August 01, 2013
The washer-dryer manufacturing plant of Miele, in Gutersloh, Germany, claims to have raised stamping output by as much as 50 percent thanks to the addition of a new Schuler 1600-metric-ton servo press. The press stamps complex housing and structural parts, many of stainless and chrome steel, and runs at up to 45 strokes/min. in progressive mode. And, as an example of running the press in transfer mode, it stamps drum caps at 24 strokes/min., compared to 16 strokes/min. using a conventional press.


See also: Schuler Incorporated

Related Enterprise Zones: Presses


Reader Comments

There are no comments posted at this time.


Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)




Visit Our Sponsors