Article




SHARE:  

Vacuum Cups for Material Handling in Hot-Stamping Applications

Saturday, June 01, 2013
 

BILSING AUTOMATION North America, Clinton Township, MI, introduces its WF2-series black vacuum cups designed to withstand the high-temperature environment of hot forming. The new silicone-free cups, made of fluorocarbon rubber, can withstand temperatures to 482 F with a medium hard material ranking of 70 Shore A.

Ongoing pressure on the automotive industry to reduce vehicle weight without impacting safety standards has created an increased use of high-strength steel (HSS), especially in the areas of structural components such as body pillars, say Bilsing officials. Although lighter and stronger than traditional steels, HSS can be a challenge in the pressroom. Hot stamping offers a stress-relieving capability that lessens the springback and warping that can occur with HSS.

Bilsing had previously addressed this growing manufacturing trend with its PSQ40 hot-stamp grippers. The introduction of vacuum cups for hot forming now provides customers a choice. Lighter in weight, vacuum cups can improve productivity and reduce tool-change time. And, vacuum cups can better handle odd-shaped workpieces.

Bilsing vacuum cups come in all automotive-industry mounts and a full range of shapes.

BILSING AUTOMATION North America: 586/463-0686; www.bilsing-automation.com

 

See also: BILSING AUTOMATION North America

Related Enterprise Zones: Tool & Die

 


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors