Article




SHARE:  

Coil Grab for Densely Packed Slit Coils

Wednesday, June 01, 2011
 

Bushman AvonTec, Milwaukee, WI, has developed a coil grab designed for handling densely packed slit coils. The unit features an adjustable coil lifter with flexible lifting legs that fit between the coils and rotate into the ID for a safe lift.

When CoilPlus-Berwick Steel, a flat-rolled steel-service center in Columbus, OH, needed to find a way to insert and remove thin slit steel coils (down to 1 in. wide) from a storage rack, the new Bushman AvonTec coil grab fit the bill. The coils are closely stacked in the rack with a narrow 1.5-in. space between them.

“The hooks are adjustable in 2-in. increments to permit handling coils of varying thickness,” says Larry Wood, CoilPlus maintenance/safety coordinator. “The main advantage of these lifters is that the feet rotate.”

To remove a coil, the hooks are lowered with the feet parallel to the coils. Once the feet are in the ID of the coil, they turn 90 deg. so they can lift the coil without damaging it or neighboring coils.

Bushman AvonTec: 800/338-7810; www.bushmanavontec.com

 

See also: Bushman Equipment, Inc.

Related Enterprise Zones: Coil Handling

 


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors