Article
SHARE:
QDC Clamp for Dies with a Flat Edge
There are 0 comments | Post a comment
Wednesday, April 01, 2009
Serapid, Inc., Sterling Heights, MI, introduces the PSH C-clamp to its line of quick-die-change clamps. The PSH, designed to work with dies with a flat
edge, mounts on a T-profiled base to form a bracket device, which then is manually inserted into a slot on a press bolster or slide. During an automated die change, the clamp head alone can be mounted permanently on the press.
The clamp is hydraulically activated and opened with a spring, and comes in a variety of force ratings from 20 to 100 kN. Clamping height can be individually configured through the height of the base piece or through the use of a custom-sized spacer.
 |
The clamp is hydraulically activated and opened with a spring, and comes in a variety of force ratings from 20 to 100 kN. Clamping height can be individually configured through the height of the base piece or through the use of a custom-sized spacer.
Serapid: 586/274-0774; www.serapid.us
See also: Serapid, Inc.
Related Enterprise Zones: Tool & Die
Reader Comments
There are no comments posted at this time.
