Article




SHARE:  

New Press Control Enables Higher-Speed CNC Punching

Tuesday, February 01, 2011
 
Fanuc FA America, Hoffman Estates, IL, introduces the 30i/31i-P model B high-speed punch-press controls, capable of supporting new levels of punching and nibbling rates in CNC punch presses. Fanuc CNCs provide up to 8 MB of high-capacity, nonvolatile internal memory available to store as many as 4000 large nested part programs. Slots are provided for ATA or Compact Flash memory cards that can add an additional 2 GB of part-program storage. Any commercially available USB storage device also can be connected to store and transfer large programs. A Fast Data Server can be installed in the CNC providing up to 4 GB of Flash memory and a 100-GBit Ethernet connection. A high-speed, error-immune fiberoptic connection between the CNC and an integrated PC front-end allows the hard disk be used for part-program storage.

The Series 30i/31i-P model B CNCs include an embedded Ethernet interface that allows the user to integrate the CNC control into a company network for data collection or for high-speed part-program transfers. Worldwide links can be set up via the Internet to enable remote diagnosis and maintenance. Because the Ethernet interface does not use a public operating system, it is practically hacker-free and immune to viruses.

Fanuc FA America: 888/326-8287; www.fanucfa.com

 

See also: FANUC Robotics America, Inc.

Related Enterprise Zones: Fabrication

 


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors