Article




SHARE:  

Die-Cover Film Eliminates Die Marks

Wednesday, October 01, 2008
 
A brochure from Lempco presents Formathane die-cover film, which allows stampers to form decorative and prepainted materials without die marks, while using their existing dies. The film—0.020 or 0.031 in. thick—acts as a buffer between the edges of the die and the workpiece being formed. It comes on rolls 4 to 36 in. wide, 50 or 100 ft. long.

Formathane also is available in sheets, bars, rods, springs and strippers.

Lempco: 800/321-8632: www.lempco.com

 

 

See also: DAYTON Lamina Corporation

Related Enterprise Zones: Tool & Die

 


Reader Comments

There are no comments posted at this time.

 

Post a Comment

* Indicates field is required.

YOUR COMMENTS * (You may use html to format)

YOUR NAME *
EMAIL *
WEBSITE

 

 

Visit Our Sponsors